Docs and FAQ - Page 36

When and How Can I Switch Off STUN Resolution?

STUN resolution is necessary for the PBX to understand what it's public IP Address is, and what port mappings are in effect for Media (to attempt NAT traversal when port forwarding is not implemented). STUN resolution may be disabled when: No External entities are in use (no bridges, voip providers, extensions) AND/OR Static Port Forwarding is in place for reliable media exchan [...]

By |March 1st, 2009|Comments Off on When and How Can I Switch Off STUN Resolution?
How do I install Microsoft Fax services on Windows Server 2008?

Note: The 3CX Fax Sending module is deprecated, and no longer supported. This article is for informational/historic purposes only. Windows Server 2008 needs to have the fax services role enabled to be able to use the 3CX Fax sending module to send faxes via Microsoft Fax. This document applies to Windows Server 2008, Server 2008 R2, SBS Server 2008 Access Server Manager. (Admin [...]

By |March 1st, 2009|Comments Off on How do I install Microsoft Fax services on Windows Server 2008?
What Call Progress Tones should I enter for my country?

Call Progress tones are audible tones used by the public switched telephone network (PSTN) central office or a private branch exchange (PBX) to signal calling parties the status of phone calls. VoIP Gateways must understand these Call Progress Tones in order to detect a busy tone, dial tone or hangup correctly. Unfortunately these Call Progress Tones can vary per country, and i [...]

By |March 1st, 2009|Comments Off on What Call Progress Tones should I enter for my country?
How to test a VoIP gateway

General Reset gateway to factory default and ensure you are running the latest firmware. Review vendor documentation and assign a IP / Subnet mask / default router or gateway / DNS entries to the device. Ensure you are documenting all this with notes and screenshots for eventual publication as an FAQ. Disable any automatic firmware upgrades to ensure the device remains on the t [...]

By |March 1st, 2009|Comments Off on How to test a VoIP gateway
How do I install the Microsoft Windows Vista fax client?

System requirements for the clients: Windows Fax and Scan should be installed. Print Services should also be enabled. The Fax printer on the Server machine should be shared to network users. Network Users should be granted permission to be able to print on this Fax Printer. To install the client: Click on Start, Programs and click on 'Windows Fax and Scan'. Select 'Fax Accounts [...]

By |February 24th, 2009|Comments Off on How do I install the Microsoft Windows Vista fax client?
How does 3CX Phone System decide whether a call is internal or external?

When is a call internal or external? Calls are decided to be either local or external based on whether the contact IP of an inbound SIP packet is local or not. To check whether the IP is local, 3CX Phone System uses the following process: It queries all IPs assignedto the PC on which it is installed. Using the subnet masks assigned, it checks whether the IP is local ACCORDING t [...]

By |February 4th, 2009|Comments Off on How does 3CX Phone System decide whether a call is internal or external?
How to change the maximum duration of a VoiceMail message

3CX Phone System has a coded limit that controls the duration of a voicemail message. This is set by default to 120 seconds. However, in certain circumstances, you may wish to change the 3CX Voicemail timeout from the default of 2 minutes (120 seconds) to something else. In this case, we will show how we can change it to 5 minutes. This change can be achieved as follows on v15: [...]

By |March 10th, 2008|Comments Off on How to change the maximum duration of a VoiceMail message
Why do my Calls end After Three Hours?

The calls end after 3 hours to prevent a scenario where a person makes a call somewhere and forgets to hang up AND the gateway does not detect the hangup. This avoids terminated calls from remaining active and helps to avoid charges. It is a fail safe feature. The 3CX Phone System is set to end calls every 10800 Seconds. This Value can be changed to any time value you like from [...]

By |March 4th, 2008|Comments Off on Why do my Calls end After Three Hours?