auto provision

  1. Handsets not provisioning after re-boot

    I was hoping someone could help with some insight into an issue we are having with a particular client. We have used 3CX successfully for many years with many clients, but are running into an issue with a recent deployment. Our customers have 8 sites, with one phone at each location (Yealink...

  2. Unsupported Error: Invalid Provisioning Credentials

    Hi, Currently we provision our Yealink IP phones by pasting the provision link directly in the phones via the web page. My order is to automate this process with the Yealink Management Cloud Service. I want to make sure that we can send the ip phones from the dirstributor directly to the...
    • JasperD
    • Thread
    • auto provision auto provisioning yealink
    • Replies: 3
    • Forum: Other

  3. Phones not communicating with pabx.

    Hi all. I have to sites configured, site A and site B. -Site A is the main site where the PABX is located. All the phones at site A works perfectly fine. Network: 192.168.31.0/24 -Site B is configured with a point to point VPN that is connected to site A. On site B i divided the network with...

  4. SSL Issue with Yealink Phones

    Hi all, I am using a custom FQDN with a GoDaddy SSL certificate by following the guide on 3CX. Unfortunately, I always need to disable 'Enable Trusted Certificates' on the Yealinks phone for the phone to auto-provision. I have spoken to Yealink and this is what they have said: I have checked...
  5. @lä

    yealink T46s auto provisioning does not work

    Hi, We use yealink T46s phones in the same LAN as the 3cx server. Unfortunately auto provisioning won't work. The phones use the latest firmware 66.82.0.20. Provisioning using the "Add" procedure in the console and copy the URL to the yealink phone works fine. Any idea whats going wrong? Best...

  6. T42G not appears in phone list and can't provisioned

    Hello, my new Phone T42G which i had updated manually to firmware 29.82.0.20 by downloading the rom file from yeahlink will not get the provisioning profile form 3cx 15.5.0. One symptom is: after I add it to a extension it is not in the list of phones and it als not appears as new phone in the...

  7. Yealink T27G Won't Auto-Provision All Settings

    I know that 3cx doesn't provide support for custom templates. So I guess we can't expect anything to be done about this. I just want to let others know so they can spend their time modifying each phone manually and not waste time trying to figure out auto-provisioning. I also understand I am...

  8. Snom Auto Provisioing not working

    Hello everybody, I got an issue with my Snom D765 phones. I want to use auto provisioing for all my phones. They already got a setting url, in their settings: https://mycompany.3cx.ch:5001/rps/cfg{mac} They also appear as new devices in the phones section of my 3CX server if I start them, but if...
  9. COM-TEL

    Provisioning Multi Accounts on single handset

    I have a client who has a Yealink T46G phone that I am trying to provision. The issue I have come across is that the client wants 4 extensions representing 4 DDI's on the one handset. When trying to provision the handset it only lets me adopt one extension. In addition to this, the first two...
  10. OCWI

    Wildcard SSL with yealink

    I have reached out to 3cx support and hit dead ends. Reached out to yealink as a reseller and hit dead ends. I would like to use my own fqdn and ssl so my stuff doesnt stop working if i dont renew their insanely priced maintenance for the thousands of PBX's we plan on deploying. This is my...

  11. T48G Auto Provisioning

    Hello, We recently set up a 3CX install on an Intel Mini PC, install went great. Most things seem to be working fantastic, however we cannot get phones to Auto-provision. I must be missing something, we have tried a Fanvil C400 and a Yealink T48G, and they do not auto-provision even though they...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom