dtmf

  1. More BLF types in settings

    Today we got an case were at a customer we needed to set an softkey to DTMF to open an gate.. But this could not be done the settings through the webinterface of 3CX. On the yealink phones webinterface it is possible to do, but changing 120 extension by hand is not so handy.
    • dake
    • Thread
    • blf dtmf key
    • Replies: 2
    • Forum: Server

  2. 3CX DTMF issue, intermittent failures when dialing into conference calls on Polycom phones

    We recently upgraded our 3CX system to version 15.5 and then switched phone providers a couple months later, from Integra to Centurylink. Right after the provider change we started getting complaints from users that they could not enter conference code ID's into our Polycom conference phones...
  3. Brian Lowrance

    Solved Cannot enter pin code in voicemail or use IVR (Internal DTMF issue?)

    I upgraded our 3CX installation from 15.5.3849.1 (15.5 SP1) stepping through each update until reaching the latest 15.5.13103.5 (15.5 SP5). All seemed to go well. I've since learned that we can no longer enter our pin code when calling the voicemail extension when using our voip phones. We...

  4. Solved DTMF issues with Snom

    Hello! We have problems with DTMF tones on Snom D715, D765 and D725 phones. At irregular intervals, the Snom phones stop sending DTMF tones. Firmware on the devices is the 3CX version 8.9.3.66 After a restart, the problem is gone for a short time. But comes back at irregular intervals. Are...
  5. Maurice Lefevere

    Recorded message to voicemail without pressing key

    Hello fellow 3CX, I'm building a call flow design for a farmacy with a voicemail box. I figured out how i can send a recorded message to an e-mail adres as an attachment. Is it possible to send the message without the caller pressing a DTMF key?. I know there is an option that "Stop recording...

  6. Snom DTMF Probleme

    Hallo, wir haben bei verschiedenen Kunden das gleiche Problem. Snom Telefone an einer aktuellen 3CX Anlage. In unregelmäßigen Abständen können die Snom Telefone (D375, D712) keine DTMF Töne mehr übertragen. Firmware auf den Geräten ist die von 3CX "mitgebrachte" .66 Version. Nach einem Neustart...

  7. Solved DTMF not working

    Hi, We moved our current IPBX install from Asterisk to 3CX, using the same SIP provider. Since then, DTMF is not working anymore. From our desk phones, and 3CX soft phones. So, there is probably something wrong in our SIP trunk config, or with the extension config? What should we check ...

  8. DTMF tones during a Conference call?

    Hello, When we try to setup a conference call, the DTMF tones do not transfer out to the additional called party. i am creating the conference and trying to add an 800 number for example. is this supposed to work in this way or is the only way to do it to call the 800 number first, then add the...

  9. Door phone dialer compatibility with 3CX

    We're proposing a 3CX system to a client with a door-phone dialer that dials a 10 digit phone number, the 10 digit phone number is routed to the phone system and the user presses a digit on the keypad to create a DTMF tone to unlock the door strike at the front door. Will this dialer be...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom