raspberry pi

  1. Zol

    SBC needs ntp.service ?

    Dear Community, I installed ntp on my 3CX PBX following this link: https://www.3cx.com/docs/installing-microsoft-hyper-v/ Should I install ntp on my SBC as well? The two systems have a different date. Could this lead to issues? root@3cx:~# date Wed Oct 16 11:14:18 CEST 2019 pi@3cx-sbc-1:~ $...

  2. Is the Raspberry Pi 4 compatible for SBC?

    We are looking at sending some phones home with some of our employees and have been looking at setting up Raspberry Pi devices for SBC instead of trying to get home routers/modem-all-in-ones configured for Direct STUN. All the documentation says to use the 3B+ boards, but I found that the...

  3. Problem testing fritzbox 7490 as sip gateway

    Hi, this time I try to test the 3cx system for my home. Everything works great but not the outgoing calls from all voip phones. My setup: Raspberry Pi 3b+ with latest 3cx installed Internal VOIP user configured in fritzbox 7490 Portforwarding for all needed ports (FW check is green) Outgoing...

  4. Solved 2nd raspbian SBC not connecting

    Created a rPi SBC with v15--worked perfectly and still does. Upgraded to v16 (16.0.910) Created a new rPi, with Stretch Lite; during SBC installation process, fails at provisioning step. Tried IP instead of domain Ensured local firewall setup properly Moved to different ISP/location Deleted /...

  5. Guidance on using SBC setup on Raspberry PI as GSM Gateway

    I was referring to the link here https://www.3cx.com/docs/3cx-tunnel-session-border-controller/ mentioning how to use raspberry pi as SBC , wanted to know can I add GSM facility to same by using some module so that it can act as GSM Gateway kindly guide me on module that can be used with...

  6. Set hostname instead of IP address for SBC raspberry edition.

    hello, in specific network, I do not have access to dhcp server and assigned the ip on the raspberrypi as static from the dhcp server. So, the raspberrypi will get a new ip each reboot from the dhcp server. that's annoying. under the 3CX -> "phone provisioning" , I am asking to add ability to...
    • sv9080w3u02
    • Thread
    • ip adress rasberry raspberry pi sbc static ip
    • Replies: 2
    • Forum: Server

  7. SBC Raspberry Pi script broken

    I'm trying to follow the directions on the 3cx website for installing the SBC on a Raspberry Pi: https://www.3cx.com/docs/3cx-tunnel-session-border-controller/ I have Noobs minimal installed, have internet connectivity working. But the download script appears to be broken. All that gets...
  8. Allen_Miller

    SBC on Raspberry Pi

    When speaking to support the other day the tech told me to run ip maddr show which I did and he said that my multicast port was wrong since it was not 224.0.1.75 He said there was an issue with Pi3 I believe and I needed to disable Wifi. I added line dtoverlay=pi3-disable-wifi in config.txt...

  9. 3cx SBC on Raspberry PI does not install

    Hi, I've setup a new Raspberry PI 3 (Downloaded Noobs installer and installed Raspbian). Followed the instructions from the 3CX website to install. Got through the config to enter all the details of the setup. At the end it says .."You can now restart your IP Phones and access the 3CX...

  10. What is the minimum hardware needed for...

    Im new to 3cx so be gentle. I am wanting to host my own 3cx server in house because for the size of my office the full voip systems are far to costly. I am wanting to setup 6 handsets plus a further 2 to be used as internal only handsets. I will be using a couple of different yealink models. I...
  11. OCWI

    Redundant SBC's / SBC reliability issue

    We are a reseller with a typical system size of 20 extensions. All of our PBX's are OVH based cloud hosted. We started doing our first few installs using a windows SBC on the client's site(s). This turned into a disaster as out of about 20 phone systems we have 1 or 2 a day where the service...
    • OCWI
    • Thread
    • linux sbc raspberry pi redundant reliability reliable sbc windows sbc
    • Replies: 9
    • Forum: Phone System / PBX
  12. 4site

    Raspberry PI - Service and tunnel status notifications

    Hello, Has anyone tried to use the GPIO pins on a Raspberry Pi to identify whether the 3CX service is a.) Running b.) tunnel connected OK. By way of LED It would be great to be able to use something like https://shop.pimoroni.com/products/blinkt as a cheap and simple way of having customers...
  13. OCWI

    Solved Raspberry Pi 3 SBC wont work after reboot

    Hello, I am trying to put raspberry pi 3's in the field as SBC's / border session controllers and things work when install the sbc right away, but then after rebooting it stops working!!!! I know little to nothing about linux, which im sure doesnt help...
    • OCWI
    • Thread
    • border session controller rasberry raspberry raspberry pi
    • Replies: 18
    • Forum: Phone System / PBX
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom