router phone

  1. Router phone not connecting to 3cx Hosted PBX

    Greetings, I have 4 Yealink T44W phones I am working on setting up with a new 3cx hosted PBX installation. At my office location, I updated the 4 phones firmware. I configured the phones under appropriate users and set them to connect directly using their router features. I then setup auto...

  2. 2 Yealink Phones 1 Extensions not Working

    Hello All, We currently have a Yealink phone/extension set up as a router phone(T87W). The same extension was previously set up on a T48G. When we did the switch from regular to router, both phones were still working but now the T48G is no connected (No Service) even though in the same wifi...

  3. Router Phone Redundancy

    Good morning, A new client wants a cloud-based PBX installation and plans to use a router phone to connect with the rest of the phones. The situation is that they require redundancy, they need two router phones so that if the primary one fails, the second one takes over automatically. This...

  4. T54w Router Phone :OK, account not registering

    we have a problem registering a SIP account on the router phone, this is on a Free 3cx hosted PBX (1533.3cx.cloud). We registered a Yealink T54W as router phone, one additional phone connected via this router phone. This setup has been working for several weeks. However now the T54w is getting...
  5. krossh

    Yealink T48U SBC Router Phones "LAGGY"

    Hello, Has anyone else noticed any "laggy" actions on their SBC router phones? We have multiple deployments, and ONLY and I mean ONLY the phones that are setup as SBC router phones are doing this. I tested by moving my phone that sits behind a PI-SBC to a router functionality, then...
    • krossh
    • Thread
    • router phone router phone sbc sbc t48u yealink
    • Replies: 0
    • Forum: Yealink

  6. Yealink Router Phones not provisioning

    We have a bunch of Yealink t46U's as Router phones. The SBC part is showing as online but no extensions will provision. They all show disabled next to registration status on the phone UI, and all appear as new phones in the phones tab in the management console. We have tried factory resets and...
    • Matt_AIT
    • Thread
    • provisioning router phone sbc yealink
    • Replies: 3
    • Forum: Yealink

  7. Router Phone

    I am using v20 and am hooking up my first router phone [Fanvil V63] to a hosted 3CX system for the first time [I was using SBCs before for remote locations]. What is not clear to me in the instructions is if I need to select anything special to choose a router phone or if I just select the...

  8. IP Router Phones: SBC

    Hi Everyone, Hoping someone could help. I am wondering why you would not set up each phone as a router phone vs why you would set up 1 and attach all other phones to that router 1 Main SBC Router phone. We have a customer who does not want all their phones connected - We prefer using a...
    • andytelco
    • Thread
    • router phone sbc sbc installation issue
    • Replies: 4
    • Forum: Other

  9. Solved Yealink T54W - Account disabled

    Hi, I have a T54W phone configured as a router phone on a on premises installation. I have also 2 other normal phones. All is working good, suddenly my router phone has "no service" (but the other 2 phones is online). If I go to the web interface of the phone I see something strange, on the...
    • auxbit
    • Thread
    • router phone t54w yealink
    • Replies: 11
    • Forum: Yealink

  10. Router Phone T53W 96.86.0.76

    Can someone confirm if the new 96.86.0.76 firmware is compatible as a SBC/Router phone? When I updated the SBC failed to register and I had to rollback the firmware to get the phone system working again. So now 3cx says the older 96.86.0.74 firmware is unsupported.
    • adv-seb
    • Thread
    • firmware router phone sbc firmware
    • Replies: 26
    • Forum: Yealink
  11. BABALUCHA

    Yealink T4XU Router Phone ?

    Hello Everyone Hope everyone is doing well and also thanks for your input. Quick question , Does anyone have done or know if Yealink T4XU Phone(s) can be used as router phone ? i m told by Yealink yes and it cab be used as router phone but in 3cx website i only see that T5 series can be router...
    • BABALUCHA
    • Thread
    • router phone sbc yealink
    • Replies: 8
    • Forum: Yealink

  12. Solved Router phone just crashed after SIP removal

    Hi all, I have a 3CX SMB system with a Fanvil x4U-V2 as the SBC Router phone. I had just ordered a SIP & DDI from a reseller but found when they sent it through this morning, was provided by Gamma, which isn't unsupported on SMB. So we have had to cancel that order. Am I in the meantime now...

  13. Solved Fanvil x4u-v2 router phone not connecting on SMB

    Hi All, Brand new phone - x4u-v2 bought to be a router phone - Latest version firmware - details displayed on Fanvil phone portal X4u-V2 - V2.0 - 2.12.16.17 Shows my name & extn details on display that is on the 3CX SMB Admin portal. Shows in the Voice & Chat area as 3CX SBC Router phone -...

  14. Provisioning X210-V2 as a Router Phone over 5G Modem

    We have a remote employee who can only get internet access using a 5G Modem. We are currently using RingCentral and trying to migrate over to 3CX. The RingCentral phone works without issue on the 5G Modem. We're using On-Premise, and I provisioned the X210-V2 out of the office using the Web...
    • tmeahl
    • Thread
    • router phone sbc x210-v2
    • Replies: 7
    • Forum: Fanvil
  15. kinetix

    Router Phone Setup

    The only way to Create a Router Phone today is to use the Web Client. That is OK...however, if you use the Web Client to Create the Router phone at the same time that you are creating the Extension itself, there is no option to change the Extension Number you are creating, it simply takes the...
    • kinetix
    • Thread
    • extension management client router router phone sbc web client
    • Replies: 1
    • Forum: Web Client

  16. Considerations of Multiple Router phones as SBCs at the Same Physical Location

    I expect we will have approximately 28 regular phones at our single physical site - and we are on Hosted. My approach will be to have three phones designated as Router Phones (as the SBCs), each serving about 8-10 regular phones as their SBC. I understand one downside to this is the risk a...

  17. Maximum Phones tied to an Router Phone acting as an SBC

    What is the maximum number of phones that can utilize a single router phone as an SBC in a Hosted deployment? I've seen some documents state that 10 phones is the limit. In other places it seems that a single Router Phone acting as an SBC at a physical site is all that's needed, no matter the...

  18. Router Phone Needs Restarted After Internet Outage Not Self Healing

    I have a customer with 5 locations all on one PBX. Each location has 3 Fanvil X5U-V2 one configured as a router phone and the other 2 connected to it. If the location looses internet for any amount of time the phones never self heal. Once they are restarted they are fine. Why are the router...
    • tek3
    • Thread
    • router phone sbc self heal
    • Replies: 6
    • Forum: Fanvil
  19. Matthew Marven

    Yealink Router phone log location

    Hi All, Is it possible to check the SBC log of a Yealink router phone? We are using a Yealink T53W (Firmware Version 96.86.0.74 | Hardware Version 95.1.0.0.2.1.2) and all of a sudden, the SBC is dropping in and out constantly. I wanted to check the SBC logs but I am not sure of the log...
    • Matthew Marven
    • Thread
    • router phone sbc yealink yealink router phone
    • Replies: 10
    • Forum: Yealink

  20. Using all router phones.

    I am doing a 70 ext install I just won. Is there any reason not to use all router phones without any phones tethered to them? Would having 70 SBC's showing up under trunks be an issue? If not it seems like a no-brainer. Then I would not have to worry about 9 phones stopping working if someone...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom