Delta Provisioning after Autoprovisioning with Yealink 48S

[JM_Hamburg]

Hallo and good afternoon from Hamburg, Germany,


I already read that if we use custom templates within the 3CX we could not get proper support. On the Other Hand some of my colleagues want some special Settings. And i am looking for an easy way to make it possible.
I switches of the reprovisioning in the Webgui of the T48S and tested the Upload of the delta Config: Worked

e.g.
distinctive_ring_tones.alert_info.2.ringer = Resource:dingdong1.wav
distinctive_ring_tones.alert_info.2.text = external

linekey.1.extension = 20
linekey.1.label = Chef
linekey.1.pickup_value = 20
linekey.1.type = 16
linekey.1.value = 21

But i don’t find a way to do an automatic upload to the phone e.g.

https://[email protected]/servlet?m=mod_data&p=status&q=load....some_more_stuff

SSH is not possible
Has anybody an idea?

Thank you and greetings from Hamburg, Germany
Jens

 

[Saqqara]

Check out https://www.3cx.com/docs/custom-ip-phone-templates/

pay attention to extra steps for yealink phones

 

[JM_Hamburg]

Dear Saqqara,

thank you for the Link, i will have a look. Anyhow i would like to manage the changes without the custome templates. Our Changes will be very minor (Ringtones, Caption of BLFs)

So if anyone know how to send a small change via HTTPS or TFTP or whatever will be great.

Greetings from Hamburg, Germany

 

[Saqqara]

What you are trying to do is not possible via 3cx.

if you manage to find a way of doing it, 3cx will wipe out any changes done when the phone provisions itself every 24 hrs - unless you remove the provisioning url from each phone

 

[JM_Hamburg]

Dear Saqqara,

yes you are right, but i changed the Setting in the Phones: