Nokia e70

[jaak200]

I have some problem with Nokia E70. I can call with E70 but another cannot call to E70. E70 registered in 3CX, line status is green. If I try call with X-Lite to E70 next information coming. 101 is X-Lite and 100 is E70.

16:37:08.265 CallTarget::create [CM005001] Forward loop detected for destination 100Forward history:{100}
16:37:07.312 CallConf:nIncoming [CM103002] Call(24): Incoming call from 101 (Ext.101) to sip:[email protected]:5060

 

[SY]

First of all check forwarding configuration of extension 100. (there is loop configured in one of cases)

Your phone must be registered in order to receive call. (must be green in line status)

Also phone MUST support one codec from this list: G711 (PCMU, PCMA), GSM, SPEEX or iLBC.

Regards,
Stepan

P.S. There can be a some problems related to NAT in E70.

 

[Borsoock]

Hi
It supports G.711. I don't know about N70 but major problem with E65 and E61i is no STUN support! I'm very disappointed by absence the most common NAT traversal method in those phones. Nokia Software Engineers really haven