Reduce Time Numbers Dialed Are Sent to PBX?

[millennium2]

Hi,

How does one reduce the time Numbers Dialed are Sent to the PBX?

I know outbound calls are sent by hitting the SEND key. However, if I pickup the phones Handset (or hit the Speaker phone button), I hear dial tone, then Dial a Number (WITHOUT hitting the SEND key), there is about a 5 second delay before the call is sent to the PBX.

Is there a way to reduce this 5 second time delay?

FYI, I am using a Yealink T38g phone. Thank you.

 

[SY]

Hi,

How does one reduce the time Numbers Dialed are Sent to the PBX?

I know outbound calls are sent by hitting the SEND key. However, if I pickup the phones Handset (or hit the Speaker phone button), I hear dial tone, then Dial a Number (WITHOUT hitting the SEND key), there is about a 5 second delay before the call is sent to the PBX.

Is there a way to reduce this 5 second time delay?

FYI, I am using a Yealink T38g phone. Thank you.

You can try to use a "reversed" procedure.
1. enter the number you need to call
2. pickup your Handset..
or
1. enter the number you need to call
2. hit the Speaker phone button

Works?

 

[lneblett]

go into the phone's web interface and look for a setting called dial delay, inter-digit delay or the like and reduce it to a time more suitable. this will eliminate a manual intervention, but will likely result in dialing too soon in some cases.