User's BLF will not update on any phone

[robert.sadler@bithappens.]

3CX Version: 8SC Pro Hosted by 3CX Version 20.0 Update 9 (Build 995 Release - AI 1.4.48)
Phones used: Poly VVX 450, Yealink T46S

I have a user whose BLF's will not update after initial phone provisioning. The phone will take the initial BLF Configuration but any additional updates to the BLF after initial provisioning do not update to the phones used.

Checking event logs, I'm showing that the Extension has received the provisioning package successfully.

Unsure of what steps I need to take to resolve issue. Reaching out to the forum for advice.

thank you,

Robert Sadler
Sr. VOIP Engineer
CCOR

 

[NikosT_3CX]

@robert.sadler@bithappens. as a first step ensure that the phones are on the correce firmware :
https://www.3cx.com/docs/phone-firmwares/
Also, if you re-provision the phones, what happens ?
If the phones are remote, do you use an SBC ?
Provision also a 3cx client on these extensions. Do the BLF update ?

 

[Alphabetic]

Do any configurations change after initial provision? Like if you change the last name, does it pull? narrowing it down if its a BLF issue or pulling the provisioning link issue.

 

[robert.sadler@bithappens.]

Hello,

I update the firmware to the recommended version listed here before provisioning: https://www.3cx.com/docs/phone-firmwares/

If I reprovision the phone the BLF's do not update still.

We do use a Debian SBC.

I'm checking into the 3cx client to see if it does show the updated BLF's just not the phones.

thank you,

Robert Sadler
CCOR