Nick Galea

About Nick Galea - Page 71

CEO, 3CX

Nick is the CEO and Founder of 3CX. His love for innovation, visionary leadership, and 35 years in the software development industry have helped drive 3CX towards becoming one of the top communications systems across the globe. Presently, he continues this mission by placing most of his energy towards company operations, product strategy and vision.

How to dial a number from a web page

Recently Nick published an excellent tip regarding direct dialing from 3CX Assistant on supported phones. I have extended this feature proposing a method to call any number shown on any web page. To make a call from web page via Yealink or Snom phone you need to do following: Use Snom or Yealink phone with latest firmware (important!) You must use Mozilla Firefox (I have not fo [...]

By |April 6th, 2010|Comments Off on How to dial a number from a web page

Configuring the Acrobits Softphone on your iPhone as a 3CX Extension

Note 1: This guide has been tested with version 3.0.4. Be aware that different version may have different interface formats and functionality Note 2: Not all providers allow calls over 3G. If your calls are working as an external extension over WIFI, but not on 3G, the ports may be blocked Installing Acrobits SoftPhone on your iPhone Go to the Apple AppStore. Download the Ac [...]

By |March 30th, 2010|Comments Off on Configuring the Acrobits Softphone on your iPhone as a 3CX Extension

Lotus Racing Formula 1 communications accelerate with 3CX

3CX appointed Official Technical Supplier London March 24 - Lotus Racing and 3CX announce that, 3CX has been appointed as technical supplier and that Lotus Racing has installed 3CX Phone System in its technical centre and mobile race track operations. The popular VoIP PBX system will be used for each F1 race around the globe – providing the vital comms link between Norfolk H [...]

By |March 24th, 2010|Comments Off on Lotus Racing Formula 1 communications accelerate with 3CX

New 3CX Fax Server Update: version 11344 for 3CX Phone System Version 8.10824

We are pleased to announce a new 3CX Fax Server Update which will be distributed via the 3CX Updates Server from within the 3CX Phone System Windows Management Console. The update improves the reliability of the fax service and increases the compatibility with VoIP providers. Please note that the fax service is RECEIVE ONLY Instructions to update: Access the 3CX Phone System Co [...]

By |March 24th, 2010|Comments Off on New 3CX Fax Server Update: version 11344 for 3CX Phone System Version 8.10824

Connecting the BeroNet berofix Box to the network

This guide will show you how to connect the bero*fix card with the LAN and WAN.   Connecting the BeroNet berofix 400/1600/6400 Connect the box to the network and plug in the power supply The default IP address of the bero*fix  is 10.0.0.2/16.  If your LAN operates in the same network make sure that the IP during the configuration is free.  If this IP is taken by another ho [...]

By |March 18th, 2010|Comments Off on Connecting the BeroNet berofix Box to the network

Configure BeroNet bero*fix CARD via Network bridge

This guide will show you how to configure a Beronet bero*fix card. The main scope of this guide is to connect the bero*fix card via a network brigde with the LAN and WAN. Setting up the BeroNet bero*fix 400/1600/6400 1. Insert the Beronet Berofix into the PC. 2. After the system has booted you will have a new network device available. 3. Windows usually detects the card as a “R [...]

By |March 18th, 2010|Comments Off on Configure BeroNet bero*fix CARD via Network bridge

Creating a Hyper V instance for 3CX in Windows 2008 R2 / 2012 R2

Virtualization is becoming increasingly popular and 3CX fully supports this technology. 3CX itself runs its PBX on Hyper-V, however we also test our PBX on VMware. This guide explains how to configure a virtual instance on Hyper V on which you can run 3CX Phone System. Prerequisites: For the purpose of this FAQ the following 4 assumptions shall be made. Microsoft documentation [...]

By |March 17th, 2010|Comments Off on Creating a Hyper V instance for 3CX in Windows 2008 R2 / 2012 R2

How can I localize/translate 3CX Phone System (Version 14)

This blog post is only relevant to V14. The 3CX Phone System is designed to be multi-lingual. Each text element in the 3CX Management Console is stored in a file and referenced from this file. By creating a localized copy of this file, it is possible to easily translate the interface and allow users to select the preferred language option. You may then be able to choose the lan [...]

By |March 16th, 2010|Comments Off on How can I localize/translate 3CX Phone System (Version 14)

3CX Advanced Training Webcast on 3CX Assistant 25 March 2010 at 1500hrs (GMT+1)

3CX is now providing additional free training Webcasts on more advanced topics, and the next one is scheduled for Thursday 25 March 2010 at 1500hrs (GMT+1). This will be presented via Microsoft Live Meeting using its built-in VoIP for audio – so there will be no need to call into a conference call number. To Join the Webcast: Go to https://www.livemeeting.com/cc/meetwith3cx/joi [...]

By |March 14th, 2010|Comments Off on 3CX Advanced Training Webcast on 3CX Assistant 25 March 2010 at 1500hrs (GMT+1)

The dance of DTMF, SIP & RFC 2833 - An introduction

Edit 16th September 2015: Please note that 3CX Phone System only works with MS Exchange Server 2013 and 2013 SP1 DTMF (dual tone multi frequency) is the signal to the phone company that you generate when you press an ordinary telephone's touch keys. In the United States, it's known as a "Touchtone" phone. DTMF has generally replaced loop disconnect ("pulse") dialling. With DTMF [...]

By |March 12th, 2010|Comments Off on The dance of DTMF, SIP & RFC 2833 - An introduction