TryLearn More

Use SIP trunks, WebRTC & Apps

Slash your Phone Bill by 80%

Export your Extensions from Asterisk®* to 3CX

Migrating from one PBX to another is not an easy task. It usually takes a lot of time for the Administrator to set up the new PBX to include all the extensions and users that the previous PBX had.

The good news is that if you’re migrating from an Asterisk® to 3CX we’ve made this process much easier. We’ve created an export module which you can easily upload onto your Asterisk® which will then export your extensions for you to upload them to 3CX version 14.

Export your extensions from your Asterisk® FreePBX® to 3CX in 5 minutes with this guide

The entire process takes literally 5 minutes, saving you an amazing amount of time and work. Read this guide for the step by step procedure on how you can export your extensions. For any support questions please post questions on the 3CX forums.

* Asterisk® is a Registered Trademark of Sangoma Technologies. This trademark is not affiliated with 3CX, its products, or its websites. Sangoma Technologies is not the source of, and does not sponsor or endorse, the products/services promoted here. 3CX is not associated with or sponsored by Sangoma Technologies. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
By |June 1st, 2016|Comments Off on Export your Extensions from Asterisk®* to 3CX