Blog - Page 267

3CX Phone System and ATOM N270 Processor Benchmarking

Many businesses who are adopting VoIP Software PBX Systems are always looking for a way to cut down costs. That's where the Intel Atom N270 comes in the picture, which is  designed to deliver performance with minimal power usage. In addition many of our partners have requested the ability to put together a low cost dedicated server based on an Intel Atom.  The Intel Atom N270 c [...]

By |March 1st, 2010|Comments Off on 3CX Phone System and ATOM N270 Processor Benchmarking
3CX Training Webcast for Thursday 11 March 2010 at 1500hrs (GMT+1)

3CX provides monthly free training Webcasts, and the next one is scheduled for Thursday 11 March 2010 at 1500hrs (GMT+1). This will be presented via Microsoft Live Meeting using its built-in VoIP for audio – so there will be no need to call into a conference call number. To Join the Webcast: Go to https://www.livemeeting.com/cc/meetwith3cx/join?id=GZ3M8K&role=attend and fol [...]

By |March 1st, 2010|Comments Off on 3CX Training Webcast for Thursday 11 March 2010 at 1500hrs (GMT+1)
3CX Assistant for Microsoft Terminal Services 8.11138

After high demand from 3CX administrators worldwide, we have finalized a version of the 3CX Assistant that is specifically designed for Windows Server OS with Terminal service roles enabled. Things to note in the 3CX Assistant TS installation (V8.11138): The Assistant installation will not prompt you to choose whether to install CRM or the 3CX Phone. These will be installed aut [...]

By |February 25th, 2010|Comments Off on 3CX Assistant for Microsoft Terminal Services 8.11138
Spitfire and 3CX offer channel complete SIP solution

London, UK - February  17, 2010 -  Spitfire, the leading Internet Telephony Service Provider, has completed full Interoperability testing with 3CX and agreed to promote 3CX to Spitfire’s 200 strong partner channel. Spitfire has become a 3CX Supported SIP Trunk provider, with Spitfire SIP Trunk configuration built into the latest release of 3CX software, and support for Spitfire [...]

By |February 17th, 2010|Comments Off on Spitfire and 3CX offer channel complete SIP solution
Configuring a CISCO SPA phone to use Active Directory as a phonebook

Cisco SPA Phones have the ability to look up for phone numbers and contacts in an Active Directory/LDAP. For this a template needs to be created and  the Cisco Phones need to be re-provisioned with this template to enable them  to access Active Directory and take AD user information from there. Step 1: Locating the Cisco template in the 3CX Management Console Access the 3CX Man [...]

By |February 11th, 2010|Comments Off on Configuring a CISCO SPA phone to use Active Directory as a phonebook
Analyzing registration of lines, gateways and VoIP providers

Introduction This article describes how an extension or a gateway line registers itself with the PBX Server to make itself available for making and receiving calls, and how the PBX Server will register itself with a VoIP Provider to make itself available for making and receiving calls. We trace through these steps by reading the server status log. The Server status log can be a [...]

By |February 10th, 2010|Comments Off on Analyzing registration of lines, gateways and VoIP providers
3rd party supported VoIP Providers

Although we recommend the use of supported VoIP Providers, in some cases it may be necessary to use an unsupported VoIP Provider. 3rd Party Supported VoIP Providers 3rd Party supported VoIP providers have been tested by the VoIP Provider or by 3CX and at the time of testing they we're known to work. You can find a list of 3rd party supported VoIP Providers here. Community teste [...]

By |February 9th, 2010|Comments Off on 3rd party supported VoIP Providers