failover

  1. Boschko

    Onsite PBX fail over/mirroring to Cloud PBX

    I don't consider myself an expert, I'm very new to this. I'm coming here for help. I was wondering how I could mirror an onsite PBX server to the cloud if the PBX were to lose power. This would be disaster failover solution. So lets say the onsite PBX is unplugged within ~3 minutes the service...

  2. Solved Phones not reregistering after failover restore

    Hello all, We are testing failover. We have DNS setup by DNSmadeEasy and not using 3cx's FQDN and have DNS failover set there. That part is working great. Failover for the system it self is working great to, server 1 goes down, 1 minute later server 2 is active and DNS is pointing there. The...

  3. 3cx failover behavior

    Hello, When the active server goes down the passive one becomes active. What is happening when the ex-active server goes up? Does it get the passive role and starts to monitor the active server? When the new active server (ex-passive) goes down, will the passive server become active again?

  4. 3CX Failover

    i have a 3CX debian 9 running on an Intel NUC. I want to install a failover on another intel NUC on site. In the admin manual it is shown as Server one or active has a static IP address 1.1.1.1 and server 2 or passive has an IP address 2.2.2.2. My question is that how can the desk phones be on...
  5. Robertos

    3CX Failover from LAN to Cloud supported?

    It appears from doco that it is not supported but may work. Has anybody tried this with AWS? I will give it a go v soon :)
  6. Robertos

    3CX Failover on same LAN

    hi, configuring this on customer site for first and using Debian stretch build. I am not sure if we provision phones using 3CX FQDN instead of local IP eg 192.168.10.51, how does the FO work if 3CX FQDN is resolving to same public IP in this case? Do we have to perform manual scripting etc...

  7. STUN phones with WAN failover

    Hi team, I'm back with another re-occurance of the same problem that I've written about earlier: https://www.3cx.com/community/threads/yealink-t58-407-proxy-authentication-required.58528 The same client had the same situation this week, and I think I've narrowed it down in my head as to what...
  8. Patrick Smalley

    Second and tertiary IP addresses for SIP Trunks

    We are using a very popular SIP provider and they (as do many others) offer secondary (and for some tertiary) IP addresses for sending/receiving calls. The older versions of 3CX allowed for secondary IP addresses on the SIP trunk configuration, where did they go, why where they removed, is...
  9. Robertos

    AWS 3CX Failover Design

    Hi I do not have an ENT license at moment to test but i am proposing this to a customer that requires redundancy. https://www.3cx.com/docs/failover/ From the failover doco it appears that FTP and Google are natively supported for backup and restore which is required for failover operation. Is...

  10. Cloud Hosted PBX - Local Internet Outage

    Is there a way to have 3CX automatically send calls to an external line if the phone assigned to the extension is offline? We host on Azure but if our network goes down locally we still want to be able to get calls routed to our cell phones.

  11. internet failover to POTS line

    Hello, I hope this makes sense We currently have several customers that have multiple buildings connected point to point and the 3CX server is virtualized in a datacenter. We are currently using EdgeMarc Gateways at each location for fail over to pots lines if the connection to the 3CX server...

  12. HA (Failover) and Private IP Addressing

    Hey Team, I've been using 3CX for many years, but I'm about to put in my first 3CX Enterprise System which will use HA and in all honesty I just can't get my head around this! What I need to understand in order to design the HA is if the Private IP Address of the 3CX server stays the same...

  13. Phones Re-Registering After WAN Failover

    I am running in to an issue with Yealink phones not fully re-registering to the backup server after a WAN failover on the primary server. The way our servers are set up is their is a primary server in one location and a backup server that is created from a backup of the primary in another...

  14. how to connect a pots line to 3cx as an extension

    our 3cx connects to a sip trunk and inbound calls are routed through this trunk. my current failover configuration routes inbound calls to cell phones if the sip connection goes down. i'd like to get one or two pots lines and have the calls routed to the pots lines instead during sip outages...

  15. 3CX WindowsDNS.bat HELP

    So i installed a Failover and as directed by 3CX partner support I created the A record in my DNS to point to the active server. They all so told me to setup a .BAT file to automatically initiate when the passive server goes active. Now I have that .BAT however it doesnt seem like its working...

  16. 3cx Failover in Linux

    Hi is there anyway to make Failover services for LAN to LAN 3cx server that running on Linux/Debian? i have digging around and didnt found exact solution for that.

  17. Solved Failover on Enterprise

    I have been working with failover today and had a question about IP addressing. Both servers are on the cloud. I assume that the network on each server needs to be set to dynamic so the address changes in 3CX DNS. At least, this is the only way to get the address changed at failover that I have...

  18. SIP Trunks - Fail Over for Providers - Multiple IP Inbound

    Many SIP Providers send calls from another IP when sending inbound calls. Please vote to add multiple IP addresses as a source accepted. Currently 3CX only accepts calls from one IP. This results in additional SIP trunks having to be created and duplicating DID rules for each sip trunk. I...
    • corporate13
    • Thread
    • 3cx did failover inbound rules redundancy sip trunks v14 v15 voip innovations
    • Replies: 12
    • Forum: Server

  19. Faliover on debian 3CX + windows DNS

    Has anyone get any idea how to setup failover between 3CX (15 SP5) installed on debian with DNS servers installed on Windows 2008/2012
  20. Moawia Noor

    3cx Failover Server

    Hi every one , we are using 3cx in our company head office , and now we are about linking some of our branches to the Main Office . So the Question is : what is the Best for a branch with 25 Ext : its own 3cx server to be lincked with the main Server . or SBC at the...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom